Selling Price -
$4,995.00
2017 Cub Cadet® PRO Z 900 L Series 960L KW
BEST IN GRASSWhen it comes to commercial lawn mowers, it doesn’t get any better than this. The PRO Z 900 L Series delivers best-in-class engine strength and unmatched durability while providing the comfort you need to keep on mowing. Take on any job confidently with a machine that has it all.
Features may include:
FEAR NO FIELD- No job is too big for the PRO Z 900. Power through the thickest grass in one pass with a commercial-grade 16cc transmission and a high-horsepower Kawasaki® engine, capable of speeds up to 14 mph.
- Our biggest 72" cutting deck cuts down job time while power steering and oversized 26" rear tires hold impressive stripes, even on hillsides and slopes.
- Equipped with the industry’s only 7-gauge deck shell, 7-gauge top and bottom reinforcements, ¼" leading edge and 5/16" reinforcements, the PRO Z 900 can take a beating and keep performing year after year.
- The pivoting front axle can take a beating so your body doesn’t have to. Enjoy a smooth ride on the exclusive Cub Cadet® air-ride ISO suspension seat, including customizable seat firmness, lumbar support and angle adjustment.
- Sal Flores, H&H Lawn Service, Inc.
- 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
- 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
- 3-year limited commercial warranty (no hour limitations)
- 2017
- Cub Cadet®
- PRO Z 900 L Series
- 960L KW
- Riding
- Kawasaki FX1000V
- 35HP
- 999cc
- Front/Yolks: 2" x 3" Solid Axle Tube with Iso Dampening Suspension and 1/2" Thick Steel Front Yokes
- PTO: Warner PTO Clutch (200 FT. LB.)
- Parker HTG 16cc Pump / 310cc Wheel Motor
- PTO/Key Switch: HD Low-Profile Throttle Lever, Sealed Key Switch & Electronic Fingertip Engagement PTO
- Blade-Tip: 18,500 FPM | Ground FWD: 14 MPH | Ground REV: 7 MPH
- Rear Bumper: 5/16" Thick Steel Rear Engine Guard/Pre-Drilled Mounting Points For Attachments with Integrated Rear Hitch
- Fabricated 7Ga. (.187") Steel Shell | Side Construction: 5/16"(.313) Steel on Trim and Discharge Sides | Style/Construction: 7Ga. Top Plate, 7Ga. Bottom Reinforcement, 1/4" Rolled Leading Edge
- Fully Welded, Full-Length 3/8 x 5" Laser Cut Steel / Integrated Tie-Down Slots
- Lap Bar/Control: High Performance & Speed Control | Adjustment: 3/4 Length Padded Bars w/Tooless Quick Adjust Dial
- Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
- 26" X 12" - 12" (Turf Tread)
- 15" X 6" - 6" Smooth (Run Flat)
- Hand-Operated Lever with Integrated Hydro Pump Release Lever
- Hour Meter: Standard Electronic
- Twin 7.45 Gal. Tanks (14.9 Gal. Total) with Electronic Fuel Gauge
- Leading Edge Reinforcement: 1/4" (.250") Steel | Top Reinforcement(s): 7Ga. (.187") Top Plate | Bottom Reinforcement: 7Ga. (.187") Bottom Plate | Deck Size/Type: 60" Fabricated Deck | Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable Trim-Side Wear Guard | Rolled Leading Edge Reinforcement: 1/4" (.250") Steel | Rops: 2"x2" Foldable 3 Position Low Profile Clearance
- Adjustment: Foot Pedal with Spring Assist 16 Positions
- Height: 1" - 5"
- 80"
- 50"
- *Discharge Chute up Width*Rop's up Height: 58"
- 1060 LBS.
- Cup Holder: Intergrated into Side POD
- Heavy-Duty Flex Chute (Impact Resistant)
- Covers: Steel - Tooless Quick Release
- High-Back Dial Suspension with EVC Cushion, Padded Arm Rests, Iso Mounted Base (Lateral Suspension), Angle Back Adjust and Lumbar Support, Seat Belt
- Deck: Triple-Blade / High-Lift Blade (standard) Marbain Blade
- System: Operator Presence
- 3 Year / No Hour Limit Commercial Warranty
- 60
- Fabricated
- KAWASAKI
- $4,995.00
- Arlington, Wisconsin
- Pre-Owned
- PUCC15368
- 2017
- Cub Cadet®
- PRO Z 900 L Series 960L KW
- 1B067H70021
- 35
- 869
- Rear Bumper: 5/16" Thick Steel Rear Engine Guard/Pre-Drilled Mounting Points For Attachments with Integrated Rear Hitch
- Parker HTG 16cc Pump / 310cc Wheel Motor
- Gas
- Available
- 50"
- *Discharge Chute up Width*Rop's up Height: 58"
- 60
- Fabricated
- KAWASAKI